Home Forums FZ750 freaks building an engine with fzr1000 barrels need advice

This topic contains 2 replies, has 2 voices, and was last updated by  Robert 8 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #566



    I’m trying to build an engine of some spare parts I have. I have an 2MG undermotor, with FZR1000 3GM barrels on it.
    What can I do best with the head and camshafts, I do have a FZR1000 3GM head and cams but also an YZF750R head with cams.
    I read on internet some people using yfz750 head for compression, yfz750 intake cam and fzr1000 or fz750 exhaust cam.

    I have fzr1000 open exhaust system and have to use the original 2MG ignition. Would like to have a litte power between 3000 and 5000 rpm for easy ridin, but above it has to be a party to me 🙂
    so what is the best combo to do for me?



    mate if not much response here, as much as i hate to send people elsewhere, but if you’re stuck, read up on http://exupworldwide.com/forum/viewforum.php?f=21



    i will register there….i hate registering on every site haha.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.