Site-Wide Activity

John Mackaway became a registered member 7 years, 2 months ago
Andrew became a registered member 7 years, 3 months ago
al changed their profile picture 7 years, 3 months ago
Zoltan commented on the post, About getting more acceleration when racing… 7 years, 3 months ago

hi mate. it depends on the track, bt generally, for each track with shorter or longer straights, choose a gearing combo which will let you get to top revs in top gear JUST before you have to back off for the turn. […]
Zoltan commented on the post, Engine Head 7 years, 3 months ago

Hi mate. if you can get a compression tester to start with, and warm it up a little, remove plugs, test compression one at a time and compare. This will at least give you an indication…
there’s no easy way to […]
steve became a registered member 7 years, 3 months ago
Mark Harrison became a registered member 7 years, 3 months ago
Ian commented on the post, fitting different swingarm in my fz 750 7 years, 3 months ago

The R1 arm is also much longer too which (i think ) will look wrong in an fz. Im breaking a 1fn with a trx850 rear end in it and have an ongoing project with a yzf750 rear, I can send pictures if you want?
Thanks
FB
Martin Ramos wrote a new post, Engine Head 7 years, 3 months ago

So i recently bought a 1987 Yamaha fz750 project bike for $500U.S. and im about done with it…. THE only problem is that when i bought it the guy said it needed a head gasket….SO i was okay. i paid for it and […]
Mike became a registered member 7 years, 3 months ago
Martin Ramos became a registered member 7 years, 3 months ago
Nate Woock became a registered member 7 years, 3 months ago
chikk109 became a registered member 7 years, 4 months ago
vinnie commented on the post, fitting different swingarm in my fz 750 7 years, 4 months ago

thanks arch thats a great help. ive got the r1 rearend sitting there ready but dont want to start fitting it if its gona be a pig. if the fzr 1000 rearend is simple to fit i might just wait for a later 17″ one to turn up.
Eric Croskey became a registered member 7 years, 4 months ago
Tony became a registered member 7 years, 5 months ago
vinnie wrote a new post, fitting different swingarm in my fz 750 7 years, 5 months ago

ive just got myself a good running fz 750 with the intention of changing the front and rear end to something newer.

ive done a few custom builds but really need some help with what rearend to put in it, ive got […]
vinnie changed their profile picture 7 years, 5 months ago
Jason Drew became a registered member 7 years, 5 months ago
vinnie became a registered member 7 years, 5 months ago
Load More